SENTRY1 TECHNICAL MANUAL VER1.6
MANUAL INTRODUCTION
The information is this manual is intended as an installation and commissioning guide for
the Sentry1 system. This manual should be read carefully before the installation
commences. Any damage caused to the equipment due to faulty installations where the
information in this manual has not been followed is not the responsibility of Videx Security
Ltd.
VIDEX run free training courses for engineers who have not installed the sentry1 system
before. Technical help is also available on 0191 224 3174 during office hours or via e-mail
SYSTEM INTRODUCTION
The Sentry1 system is primarily a multiple entrance audio or audio/video system. The
system has no limit on the number of apartments for which it can control although we
suggest using this system on small to medium sized installation of no more than 20
apartments.
The system benefits from advanced features such as full privacy of speech, fully privacy of
lock release, adjustable calling time, speech time and door open time and the facilities for
both push to exit button and tradesman button. There are many optional extras available
for the system including full line card isolation, door monitoring and access control (coded,
proximity, Bio). A range of options are also available for the apartments including a range
of telephones with varying facilities, videophones, extension sounders and strobes.
SYSTEM COMPONENTS
A standard audio system will comprise of two door panel, control cabinet and audio
telephones. A standard video system will comprise of a door panel, control cabinet, video
splitters and videophones. The individual parts are described below.
DOOR PANELS
Door panels from the 800 Series (Using the 837 amplifier), 4000 Series (Using the 4837 or
4832 amplifier) and vandal resistant (Using the 437 or 537 amplifier) range can be used on
the Sentry system.
Art.837 Amplifier connections
Connection Function
2 Transmit speech to apartment
~ 13Vac input for name plate lights
3 Switched +12Vdc input
1 Receive speech from apartment
4 0V (Ground)
~ 0V input for name plate lights
X Not Used
P2 Push button 2 output
P1 Push button 1 output
C Button common connection
Art.437 or 537 Amplifier + Connector PCB
Connection Function
1 Receive speech from apartment
2 Transmit speech to apartment
3 Switched +12Vdc input
4 0V (Ground)
CB Button common connection
A Trigger from door
1 Push button 1 output
2 Push button 2 output…………
10 Push button 10 output
(5 Seiten)
(72 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern