
75
VX 2200
Digital System “Two wire” BUS audio - “Six wire” BUS video
Art.2280-1
“2 wire” Bus INTERFACE
The Art.2280-1 enables the connection of the VIDEX Telephone Interface (Art.280N1) or the VIDEX PABX interface (Art.275) or the
VIDEX apartment station (Art.500MM) onto the VX2200 system “2 wire” Bus. Please, see “Telephone Systems” in this catalogue.
Art.VX4203-0,1,2
Speaker unit module with functional/Digital Interface
This unit is built into a single 4000 series module, it includes the speaker and interfaces to the digital bus. Up to
64 push buttons can be added to the interface using the Art.4842, 4843, 4844, 4845 etc (The 4203 is available
with either 1 button, 2 buttons or no buttons).
Art. VR4KAM2W
Speaker unit module with functional/Digital Interface vandal resistant line
The VR4KAM2W is a 4000 series digital ‘two wire’ vandal resistant speaker module which has been specically
developed for the Videx VX2200 (two wire audio and six wire video) bus systems. This module oers the same
features as the VR4KAM with the addition of being able to connect up to 23 individual buttons using the vandal
resistant VR4KBM button expansion modules.
Art.8202, 8202R Digital Front Panels
These units are built into a double 8000 series module (stainless steel/S or aluminium/A) and have numeric key-
pads and 8 alpha buttons (8202) or a numeric keypad with 3 “Repertory Names” navigation buttons (8202R), 2 x
16 character LCD display and speaker unit..
Art.8203-0,1,2
Speaker unit module with functional/Digital Interface
This unit is built into a single 8000 series module, it includes the speaker and interfaces to the digital bus. Up
to 64 push buttons can be added to the interface using the Art.8843, 8844, 8845 etc (The 8203 is available with
either 1 button, 2 buttons or no buttons).
Art.VX2204-1, Art.2204N
4 way (optional) Isolation Board
This unit isolates the telephones from the main bus preventing a single telephone from compromising the sys-
tem. One PCB is required for every four handsets..
Art.VX2206
Digital BUS Exchanger
For use with two level systems enabling more than one speech path (One per internal block). For videointercom
systems is required the VX2206/V.
Art.2206N
Block exchanger for audio/video door entry systems.
The Art.2206N has been developed from the Art.2206A and 2206V (BUS exchange devices) to give greater system
exibility in one and two level system design and permits far longer cable runs. The 2206N can be used to dis-
tribute the system BUS or used where the installation is greater than 180 apartments. The 2206N allows multiple
speech paths on two level systems or on installations with a main digital entrance panel and a number of digital
or functional secondary block or sub entrances with up-to 998 apartments. This module can also be used on
installations where the existing cable cross section is found to be too small.
Note: main door stations used with Art.2206N must be digital panels (8202 or 4202 and related versions) with rmware release 5.0 or later.
Art.VX2210A-1/A
Digital Concierge Unit for intercom systems
The VX2210 allows the operator to handle and to transfer the calls from and to the users. Depending on the
selected operating mode (day-night-o), it is possible to carry out dierent functions from the concierge. For
video intercom systems, it is necessary to use VX2210-1/V (As VX2210-1/A with additional at screen monitor). An
RS232 input to a PC is also available.
Kommentare zu diesen Handbüchern