
PAGE 6 of 24 VR4K (4+1) SERIES TECHNICAL MANUAL VER1.1
Proximity module connections
Connection Function Colour
- 0V power connection Grey
12V 12Vdc power connection White
RK Serial data connection to controller Yellow
LR Red LED control line (Also controls the internal sounder) Brown
LG Green LED control line (Also controls the internal sounder) Green
CODE LOCK (Art.VR4KCLM)
The codelock module can be powered from 12-24V AC or DC and includes three dry
contact relay outputs and two switched 0V push to exit button inputs which can be used to
trigger relay 1 & 2). 1 code per relay can be programmed into the device. Codes can be 4-
8 digits long. Relay time can be 01-99 seconds or latching (00). When in latching mode,
enter the code followed by Enter to latch and the code followed by Clear to unlatch.
Codelock module connections
Connection Function
+ 12-24V AC or DC power input
- 0V power input
C1 Relay 1 common connection
NO1 Relay 1 normally open connection
NC1 Relay 1 normally closed connection
C2 Relay 2 common connection
NO2 Relay 2 normally open connection
NC2 Relay 2 normally closed connection
C3 Relay 3 common connection
NO3 Relay 3 normally open connection
NC3 Relay 3 normally closed connection
SW1 Switched 0V input to trigger relay 1
SW2 Switched 0V input to trigger relay 2
Codelock programming can be found towards the end of this manual
POWER SUPPLIES
Art.520M
The power supply is the Art.520M. Outputs of 12Vdc (200mA), 8Vdc (300mA) and 13Vac
(1A) are available. The dc outputs are designed to power the amplifier modules only and
must not be used to power other devices such as lock releases etc. These items must be
connected to the AC output of this power supply or an auxiliary power supply.
NOTE: ANY 1A 13.8Vdc PSU can be used with this amplifier as an alternative to the 520M.
CONNECTIONS
Terminal Function
+12 12Vdc output (200mA Max.)
+8 8Vdc output (300mA Max.)
- 0V (Ground)
~
13Vac (1A Max.)
230 Mains in (Live connection)
0 Mains in (Neutral connection)
Fuse
compartment
AC FUSE: 1.6A
20mm quick blow
DC FUSE: 315mA
20mm quick blow
Kommentare zu diesen Handbüchern