
PAGE 20 of 68 VX2200 TECHNICAL MANUAL VER1.5
VX123 VIDEO SWITCHING PCB
The VX123 is used on multiple door video systems to switch the
video from a single door to the bus. Each PCB can control up to
four video panels. Multiple PCB’s can be used to expand the
system. A green LED indicates when a panel is connected to the
bus.
CONNECTION FUNCTION
GND 0V
+12 12Vdc from PSU to power the PCB
+20 20Vdc switched to the relevant door when triggered
V1 + Sync video signal switched to relevant door when triggered
V2 - Sync video signal switched to relevant door when triggered
SL Trigger input to activate a channel (Switched 0V)
4 WAY ISOLATION PCB (2204N)
The 2204N will protect against shorts or faults on all connections to an apartment. Plug in connections are
used for easy maintenance. The 2204N can also be connected as a bus in a prewired cabinet and is
addressed using a 6 way dip-switch bank. For video systems there is an additional video isolation card (316I
for non-coax or 894I for coax) which piggy backs this board and includes all the additional connections for
video. There are 10 LED’s on each card which can be used to identify when a channel is in use (Green
channel LED on) and to indicate a variety of faults such as shorts on +12V out, short on bus and S1
permanently active.
Six way connectors – Main bus in/out
Five way connectors – Four outputs to
apartments.
Connection
Function
-
0V
L
Bus connection
12V
+12Vdc
D
Door open LED (Switched 12V)
S1
Spare service button on telephone
(Switched 0V)
LED
Function
D1
Bus fault output 1
D8
Bus fault output 2
D14
Bus fault output 3
D19
Bus fault output 4
D7
Output 1 active
D6
Output 2 active
D5
Output 3 active
D4
Output 4 active
D21
S1 service switch active
D3
12V out fault on one of the outputs
Kommentare zu diesen Handbüchern