Videx VX2200 Anleitung zur Fehlerbehebung Seite 29

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 68
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 28
PAGE 29 of 68 VX2200 TECHNICAL MANUAL VER1.5
OPERATION
To answer a call and open the door:
Pick the handset up and speak with the visitor (or concierge); press the
’ button (if it is an external call) to open the door (an acoustic signal will be emitted and the door will be
opened for the time programmed) or replace the handset to end the conversation; if the call is local (local
bell), the call tone will have a different tone.
To call the Concierge Unit (if available): With the handset replaced, press the button and wait: A
confirmation tone will be heard, the call is booked on the concierge and will be answered at the discretion of
the operator.
To activate the service relevant to the push button (except the Art.3176): It is possible to use this push
button as an “alarm” push button: make a short between one of the “SW” terminal and the “-” terminal and
then connect the free “SW” terminal to the “AL” terminal. The signal generated will be received by the
concierge and/or by the Art.512DR to activate an additional service.
PROGRAMMING
To select the desired melody (3171 & 3172 only):
Hold down “ ” button until (Approx. 10 seconds) the
intercom plays the active melody; at the end of the melody the intercom will emit a beep (end of play);
1. Listen to the available melodies (by pressing and releasing the “
” button).
2. After the ‘end of play’ beep if you don’t press the “ ” button within 3 seconds, the last melody heard is
selected.
To switch ON the privacy mode:
For the Art.3172 put the switch into the ON position. The small window over the switch will be RED.
For the Art.3176 press the push button marked
; the red LED “privacy on” will illuminate.
To switch OFF the privacy mode:
For the Art.3172 put the switch into the OFF position. The small window over the switch will be WHITE.
For the Art.3176 press the push button marked
; the red LED “privacy on” will switch off.
ID programming is carried out by setting the internal 8 way dip-switch to the positions shown on the
decimal/binary conversion table of this manual.
The Art.3176 also has an additional 3 way dip-switch to set the duration of the privacy time as follows:
DIP SWITCH S1
Time
DIP SWITCH S1
Time
1 2 3 1 2 3
off off off unlimited off off on 2 hours
on off off 15min on off on 4 hours
off on off 30min off on on 8 hours
on on off 1hour on on on 16 hours
Technical Specifications
Addressing range : from 1 to 180 (BIN code)
Working voltage : BUS line Voltage
Stand-by absorption : about 0.6 mA
Phone max. absorption : about 80mA
Working temperature : -10 +50 C°
Seitenansicht 28
1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 67 68

Kommentare zu diesen Handbüchern

Keine Kommentare